This video will demonstrate the process of fitting Turnamic bindings onto IFP plates. The system requires you to glide the bindings over the mounting plate:
- Begin by attaching the rear section of the binding to the front section.
- Adjust it to suit the size of your boot.
- Then, you have to unlock the binding using a small switch situated in the front part.
- Proceed by sliding the binding onto the mounting plate.
- It is essential to fit both the front and rear sections simultaneously.
- At this point, you have the chance to adjust the binding’s position.
- Finally, ensure the binding is secured by locking it firmly.
Your bindings are now successfully fitted!