Assembling a Complete Pro Scooter

In this video, Felix, our scooter expert, guides you through the scooter assembly process. By following this guide, you'll be ready to ride your scooter in no time:

1. Begin by removing all the plastic and foam.
2. Tighten the compression system using an Allen key.
3. Then, securely tighten the wheels.
4. Loosen your clamp afterwards.
5. Place the scooter on the ground and push down until the bar is in place.
6. Return the scooter to the table.
7. Ensure the fork, clamp, and bar are aligned.
8. Finally, tighten the clamp.

Your complete scooter is ready for use!