CM10 Solid/Powder Glider Wax Yellow Ski Glide Wax

Enhance your glide with SkiGo CM10 glider wax in solid fluoro. Ideal for warm climate ranging from -2° C to +20° C for aged granular snow conditions.

1) Begin by preparing your skis with graphite, then apply glider wax suitable for the temperature in the glide areas.

2) Rub a thin coat of CM10 wax on the glide areas.

If you intend to ski distances exceeding 5 km, it is recommended to heat the CM10 glide wax with an iron at 160° C or utilise a natural cork to apply it in the glide areas. After a 15-minute resting period for the skis to cool down, brush them thoroughly with a horsehair brush available on this page: https://www.skatepro.uk/759-14294.htm