BP 12 Electric Pump Inflatables SUP

Electric pump for inflating inflatable SUP boards.

The Scoprega BP 12 offers an intelligent and effortless solution for inflating SUPs.

You can select the desired pressure level, and the pump will automatically stop once this pressure is achieved. The maximum pressure is 14.5PSI (1 bar), with a voltage supply of 12V DC, and an air flow rate of 42.27 gallons (160 litres) per minute.

A valve connector suitable for inflatable SUPs, along with a bag that has a shoulder strap, is included.

This pump is equipped with a 5.58 feet (1.7 metres) hose and a 9.84 feet (3 metres) power cord.

It is also compatible with inflatable boats and kites.

Instructions:

• Attach the pump using the two crocodile clips to a 12 Volt battery - NOTE: The reason a 12V accessory socket plug-in (Car Cigarette Lighter plug-in) is not included in this pump kit is because the pump is too powerful for connection through that socket.
• Fix the suitable valve connector onto the hose
• Connect to the SUP, kite, or boat valve
• Select the appropriate air pressure level on the BP 12 Electric for what you wish to inflate
• Press the start button
• The pump ceases operation automatically when the specified air pressure level is attained

Dimensions:

• 20.5cm x 10.5cm x 13cm